Home Page  
Company Profile  
Showroom  
Thermal Insulation
Fiber Glass Wool
KAVITA TRADING CO.
Phenotherm Fire-Resistant Phenolic Foam
To inquire, Select Product/s & Click on

Product Code : 11

[Select]
Product Specification
Slabs
  • Density : 35, 40, 50, 60 Kg/m
  • Thickness : 25, 30, 40, 50, 60 & 75 mm
  • Facings : Kraft Paper, Aluminium, Decorative Laminate and Decorative Paper.
Pipe Sections
  • Density : 40 to 50 Kg/m
  • Thickness : 25 to 100 mm
  • Nominal Bore : ½" to 14"
  • Facings : Bare & Aluminium Foil
    • Insulation Foam

  •  

    1. Phenolic Foam
      Its Property:
      -Fire Resistant material
      -Does not Assist Burning
      -Self extinguishing when source of fire is removed
    2. Rigid Polyurethane Foam
      Its Property:
      -Outstanding Insulation Properties
      -Prevents Heat loss
      -Alternatively maintains temperature in cold environment
      -High mechanical strength
      -Adhesion, Flexibility
      -Good Flow Ability
      -Necessary for consistent fill and insulation of pipe section
    3. Polyester Polypol
      PHENOTHERM:

      You'll discover that Phenotherm is a superior insulation material as it has a host of distinctivefeatures which makes it so. Phenotherm is cost-effective too. Which means investing in it is money well spent in the long run.
      Phenotherm Sheets, Pipe Sections, Segments, Elbows and other Pre-fab profiles are applied in HVAC & R Applications in Universities, Medical Facilites, Offices, Airports, Underground Railway Terminals, Cinema Complexes, Shopping Arcades, and other Public Utilites.

      Phenotherm, has special features that enable it to resist fire. Phenotherm conforms to the highest fire rating standards and has been tested as per the following BS Standards.
        Phenotherm is available in the form of Slabs, Pipe Sections, Buns/Blocks
       
        Phenotherm Slabs range
         
      Density: 35, 40, 50, 60 kg/M3
      Facings: Kraft Paper, Aluminium, Decorative Laminates, Decorative Paper
      Thickness(mm): Size:
      30, 55mm 1M x 1M; 1M x 1/2M; 2` x 2`; 4` x 2`
      40, 50, 60mm 1M x 1M; 1M x 1/2M;
      75mm 1M x 1/2M
      		 
        Phenotherm Pipe sections range
         
      Density: 40 to 50 kg/M3
      Facings: Bare, Aluminium
      Normal Bore: 1/2" to 14" and above on request
      Thickness(mm): Size
      25,55,40,50,60,75 & 100mm IRMT
         
       
         Phenotherm Features
       
      HOW PHENOTHERM COMPARES WITH OTHER INSULATION MATERIALS UNDER FIRE
      Fire Properties PHENOTHERM Urethane (Polyurethane & Polyisocyanurate) Expanded Polystyrene
      Ignition Non-Burning Catches Fire Burns Instantly
      Smoke-Generation Negligible (less than 5% obscuration) Very High High
      Toxicity of Smoke Nil Toxic gases like Hydrogen Cyanide and Nitrogen Oxide are produced Nil
      Flame Spread Very low High Normal Duty (ND) - Very high TF - High
      Self-Retention During continuous fire, it turns dark brown and shows surface cracks Burns off in a continuous fire with intense flame and loses shape Melts and drips and loses shape
Other Products
Nitrile Foam
Nitrile Foam 		Resin Bonded Rock Wool
Resin Bonded Rock Wool 		Rockwool Mattress
Rockwool Mattress 		Chopped Strand Matt
Chopped Strand Matt 		Glass Wool
Glass Wool 		Foam Boards
Foam Boards
 
<< Back
CONTACT DETAILS
Sidhivinayak Chs., Ft-8,1st Floor, Bldg.-319, Pantnagar, Ghatkopar (E), Mumbai - 400077, Maharashtra, India
Phone:91-22-25162470
Fax:91-22-25162471
Send Mail     
Key Personnel
Mr. Arvind N. Gajra (Proprietor)
Mobile:+919821206720
  
Copyright © 2006 tradeindia.com. All Rights Reserved. Designed & Developed by